SSC JE Syllabus 2025 For Paper 1 and 2 With New Exam Pattern

SSC JE Syllabus: The Staff Selection Commission (SSC) conducts the SSC JE Exam yearly to recruit candidates for the Junior Engineer post. The exam consists of two papers, where their general and professional knowledge is tested. To prepare for the exam, candidates must be well-informed about the SSC JE Syllabus and Exam Pattern. The paper-wise syllabus and stage-wise exam pattern for the SSC Junior Engineer are shared below.

SSC JE Syllabus 2025

The SSC JE Syllabus is mentioned in the SSC JE Notification, which is released on the official website of SSC. For the convenience of the candidates, we have shared the official SSC JE Syllabus for Paper 1 and Paper 2 in this article. Along with the syllabus, it is also necessary to know the exam pattern of the exam. The SSC JE Exam Pattern outlines the marking scheme and exam duration of the exam. 

SSC JE Exam Pattern 2025

In the SSC JE Exam, there will be 2 papers, Paper 1 and Paper 2. Paper 1 tests their General Knowledge with subjects like- General Intelligence and Reasoning, General Awareness, General Engineering- Civil and Structural, Electrical & Mechanical. The paper is for professional knowledge and has three parts: Part A (Civil Engineering & Structural Engineering), Part B (Electrical Engineering), and Part C (Mechanical Engineering).

SSC JE Paper 1 Exam Pattern

SSC JE Exam 2025: Both papers will be conducted in the online mode. Paper 1 will contain a total of 200 questions for a total of 200 marks, for which 2 hours will be provided. The detailed Exam Pattern is given below.

Subject	Number of Questions	Maximum Marks	Duration & Timings
General Awareness	50	50	2 Hours
General Intelligence and Reasoning	50	50
Part A- General Engineering (Civil & Structural) Part B- General Engineering (Electrical) or Part C- General Engineering (Mechanical) or	100	100
Total	200	200

SSC JE Paper 2 Exam Pattern

In SSC JE Paper 2, there will be a total number 300 questions for which 2 hours are provided. The total marks for this paper are 30,0, and there will be a negative marking of 1 mark for each question.

Subjects	No. of Questions	Maximum Marks	Duration & Timings
Part A- General Engineering(Civil & Structural) ORPart B- General Engineering (Electrical)ORPart C- General Engineering (Mechanical)	100	300	2 Hours

SSC JE Paper 1 Syllabus 2025

The SSC JE Paper 1 will be conducted for 3 subjects: General Awareness, General Intelligence and Reasoning and General Engineering and the detailed syllabus is given below.

1. General Intelligence & Reasoning

• Word Formation
• Direction and Distance
• Puzzles & Seating Arrangement
• Paper Folding Method
• Verbal reasoning
• Venn Diagram
• Blood Relations
• Non-Verbal Reasoning
• Series
• Classification
• Analogy
• Seating Arrangement
• Coding-Decoding
• Matrix

2. General Awareness

• Important Schemes
• Portfolios
• Culture
• History
• Awards and Honors
• Current Affairs
• Sports
• Economic
• People in the News
• Science
• Books and Authors
• Geography
• Static General Knowledge

3. General Engineering (Civil and Structural), (Electrical & Mechanical):

There are 3 parts in this section. Check the part-wise syllabus below:

Part A: Civil Engineering

• Soil Mechanics
• Transportation Engineering
• RCC Design
• Environmental Engineering
• Estimating
• Irrigation Engineering
• Costing and Valuation
• Steel Design
• Theory of Structures
• Concrete Technology
• Building Materials
• Surveying
• Hydraulics

Part B: Electrical Engineering

• Transmission and Distribution
• Synchronous Machines
• Estimation and Costing
• Basic Electronics
• AC Fundamentals
• Measurement and Measuring Instruments
• Fractional Kilowatt Motors and Single-Phase Induction Motors
• Generation
• Electrical Machines
• Magnetic Circuit
• Circuit law
• Utilisation and Electrical Energy
• Basic concepts

Part-C: Mechanical Engineering

• Refrigeration cycles
• Fluid Statics
• Engineering Mechanics and Strength of Materials
• 1st Law of Thermodynamics
• Hydraulic Turbines
• Properties & Classification of Fluids
• Air Standard Cycles for IC Engines
• Air Compressors & their cycles
• Specification
• IC Engine Cooling & Lubrication
• Nozzles & Steam Turbines
• Theory of Machines and Machine Design
• 2nd Law of Thermodynamics
• Boilers
• Classification
• Rankine cycle of the System
• Principle of Refrigeration Plant
• Dynamics of Ideal Fluids
• Measurement of Flow Rate
• Centrifugal Pumps
• IC Engine Performance
• Basic Principles & Classification of Steel
• Measurement of Fluid Pressure
• IC Engines Combustion
• Fitting & Accessories

SSC JE Paper 2 Syllabus 2025

Candidates who will appear in the SSC JE Paper 2 will have to attend three papers- General Engineering(Civil & Structural), General Engineering (Electrical), and General Engineering (Mechanical). Please refer to the detailed syllabus below for more information.

Subject	Topics
Civil Engineering (Part A)	Building Materials: Physical & chemical properties, Classification, Standard Tests, Uses, Manufacture/Quarrying. Estimating, Costing & Valuation: Estimate, glossary, analysis of rates, unit of measurement, items of work (earthwork, brickwork, RCC, shuttering, timber, painting, flooring, plastering), cost estimate of septic tank, pavements, truss, piles; Valuation (value, cost, scrap, depreciation, obsolescence). Surveying: Principles, chain surveying, compass traversing, bearings, local attraction, plane table, theodolite, levelling, contouring, tachometric survey, curve setting, earthwork calculation,and advanced equipment. Soil Mechanics: Soil origin, phase diagram, definitions (void ratio, porosity, etc.), IS classification, Atterberg’s limits, permeability, aquifers, effective stress, consolidation, shear strength tests, compaction, earth pressure theories, bearing capacity, SPT, plate load test. Hydraulics: Fluid properties, hydrostatics, Bernoulli’s theorem, flow through pipes, open channels, weirs, spillways, pumps, turbines.Irrigation Engineering: Definition, necessity, benefits, methods, rainfall measurement, runoff, evaporation, infiltration, crop water requirement, canal types, lining, wells, weir & barrage, Kennedy’s & Lacey’s theory, floods & control, water logging. Transportation Engineering: Highway (elements, design, pavements, tests, construction, maintenance, drainage), Railway (components, track geometry, junctions, yards), Traffic (surveys, flow, density, intersections, safety, signals). Environmental Engineering: Water quality, supply, purification, sanitation, sewerage, sewage treatment, drainage, solid waste, air & noise pollution, causes, effects, control.
Structural Engineering (Part A)	Theory of Structures: Elasticity, determinate & indeterminate beams, shear force & bending moment diagrams, moment of area & inertia, stresses in sections, chimneys, dams, columns, torsion, slope deflection. Concrete Technology: Properties, uses, cement aggregates, water-cement ratio, workability, mix design, placement, curing, quality control, repairs, hot & cold weather concreting. RCC Design: Beams (singly & doubly reinforced), cantilever, T-beams, lintels, slabs (one-way, two-way), footings, columns, staircases, retaining walls, water tanks (Limit State & Working Stress).Steel Design: Columns, beams, roof trusses, plate girders.
Electrical Engineering (Part B)	Basic Concepts: Resistance, inductance, capacitance, current, voltage, power, energy, units. Circuit Law: Kirchhoff’s law, network theorems.Magnetic Circuit: Flux, reluctance, materials, induction. AC Fundamentals: RMS, average values, AC circuits, resonance, 3-phase system. Measurement & Instruments: Power, energy, frequency, phase, ammeter, voltmeter, wattmeter, multimeter, CRO, CT, PT, Earth fault detection. Electrical Machines: DC machines, transformers, induction motors, braking, speed control, efficiency, autotransformers. Fractional kW & 1-Phase Motors: Characteristics & applications.Synchronous Machines: EMF generation, regulation, parallel operation, motors. Generation, Transmission & Distribution: Power factor, tariffs, faults, circuit breakers, fuses, relays, protection, cables, efficiency, power stations. Estimation & Costing: Lighting schemes, machine installation, and earthing. Utilisation of Electrical Energy: Illumination, heating, welding, electroplating, electric drives. Basic Electronics: PN junction, transistors, BJT, JFET, simple circuits.
Mechanical Engineering (Part C)	Basic Concepts: Resistance, inductance, capacitance, current, voltage, power, energy, units. Circuit Law: Kirchhoff’s law, network theorems.Magnetic Circuit: Flux, reluctance, materials, induction. AC Fundamentals: RMS, average values, AC circuits, resonance, 3-phase system. Measurement & Instruments: Power, energy, frequency, phase, ammeter, voltmeter, wattmeter, multimeter, CRO, CT, PT, Earth fault detection. Electrical Machines: DC machines, transformers, induction motors, braking, speed control, efficiency, autotransformers. Fractional kW & 1-Phase Motors: Characteristics & applications.Synchronous Machines: EMF generation, regulation, parallel operation, motors. Generation, Transmission & Distribution: Power factor, tariffs, faults, circuit breakers, fuses, relays, protection, cables, efficiency, power stations. Estimation & Costing: Lighting schemes, machine installation, and earthing. Utilization of Electrical Energy: Illumination, heating, welding, electroplating, electric drives. Basic Electronics: PN junction, transistors, BJT, JFET, simple circuits.

FAQs

Q1: How many papers are there in the SSC JE Exam?
Ans: As per the SSC JE Exam Pattern 2025, there are two papers – Paper 1 (objective type) and Paper 2 (descriptive type).

Q2: What subjects are covered in SSC JE Paper 1?
Ans: According to the SSC JE Syllabus 2025, Paper 1 includes three subjects: General Intelligence & Reasoning, General Awareness, and General Engineering (Civil & Structural / Electrical / Mechanical).

Q3: What is the syllabus for SSC JE Paper 2?
Ans: The SSC JE Paper 2 Syllabus 2025 is based on General Engineering, and candidates have to attempt one part from Civil & Structural, Electrical, or Mechanical.

Q4: How many questions and marks are in the SSC JE Paper 1?
Ans: As per the SSC JE Exam Pattern 2025, Paper 1 has 200 questions for 200 marks with a total duration of 2 hours.

Q5: What is the total mark and duration of SSC JE Paper 2?
Ans: SSC JE Paper 2 carries 300 marks with 100 questions, and the exam duration is 2 hours.